Table of Contents
How Big Should the flame be on a pilot light?
blue
Can a pilot light cause a fire?
How to Adjust the Pilot Light Flame on a Gas Furnace
Is the pilot flame supposed to stay on?
about 1/2 inch
Should the flame touch the thermocouple?
If this leak continues, its concentration may reach a point where a spark such as that from a cigarette lighter, static electricity, or even the pilot light itself as it is re-lit will cause a fire or even an explosion.
How high should the flame be on a gas fireplace?
On some fireplaces, there will be a Lo-Hi button that allows you to adjust the flame upward or downward. On others, there will be a screw that you can easily adjust with a screwdriver. Turning the screw clockwise will lower the flame, while a counterclockwise motion will turn it up.
Can a pilot light flame be adjusted?
Inspecting a Gas Furnace Pilot Light Flame A natural gas flame should be a bright blue color with a small amount of yellow at the very tip. A propane flame will have more of a bluish-green flame with a tinge of yellow at the tip. The flame should strong enough to cover about 1/2 inch at the end of the thermocouple tip.
What should a pilot light flame look like?
A healthy pilot light should shine a bright blue color. If the flame is more of a yellow or orange color it is an indication that there is a problem, and something isn’t working properly. The color of the pilot light is always indicative of it burning either efficiently or inefficiently.
Is it okay to leave the pilot light on?
Generally speaking, it is safe to leave your continuous pilot light on at all times, assuming it stays lit (more on this in a moment). While it does cost more to keep your pilot light on in between uses, it can actually have some benefits to your system.
Is it safe to leave pilot light on gas logs?
We recommend that you turn off your gas fireplace pilot light seasonally. Turning off your gas fireplace’s pilot light can save a substantial amount of energy and money. It is important to remember that not all gas fireplaces have standing pilot light, or, a pilot light that is always on.
Is the pilot light supposed to stay on in a gas stove?
A pilot light is connected to a gas line, which keeps it continuously aflame. When the pilot light won’t stay lit, the gas may still escape from the pipe. Instead of feeding a fire, though, it goes into your home. Pilot lights have a safety valve, which should cut the gas when the light goes out.
Is the flame always on in a gas fireplace?
Do Gas Fireplaces Always Have A Flame? Gas fireplaces that use a standing pilot ignition system will have a pilot flame that’s always on. Gas fireplaces that use an intermittent pilot ignition system won’t have and/or require a flame that’s always on as the pilot can be switched on and off as required.
Does pilot light stay on all the time water heater?
What Does it Do? Gas and propane fueled water heaters use a small flame to ignite the burner. This small flame is called a pilot light and it stays lit at all times. When the water heater needs to heat the water within the tank, it ignites the gas burner with the help of the pilot light.
How close should thermocouple be to flame?
about 1/2 inch
How do you know when your thermocouple is bad?
If you can’t get the flame to light at all, and you’re sure the gas is on, there’s probably an obstruction in the pilot tube. If the flame lights and goes out when you release the gas control knob after holding it in for the recommended 20 to 30 seconds, that’s the sign of a thermocouple malfunction.
How do I know if my thermocouple is bad on my gas fireplace?
The Fix: Pilot Light to Gas Fireplace Won’t Stay Lit So you’ve checked your pilot light and even reset it, but still, it wont stay lit. This can be an indication that your fireplace thermocouple is either bad or worn out.
How do you adjust a thermocouple?
Adjusting the Thermocouple Correcting the first condition is a simple process. Simply shut off the gas, reach under the burner and push or pull the probe to reposition it. If the thermocouple is faulty, remove it by unscrewing it from the burner and pulling it out. Reverse the procedure to install a new one.
What should the flame look like in a gas fireplace?
Proper Flame Colour A gas fireplace should burn flames that are blue, perhaps with very small tips in yellow or orange. The flames should be steady and consistent no matter what. Although, there is a small exception.
How do I make my gas fireplace flame better?
Turn the key valve counterclockwise as far as it will turn to open the gas line. Start the fire by following your gas fireplace lighting instructions. Turn the gas control knob to high to increase the flames in your fireplace if applicable
Can flame height be adjusted on gas fireplace?
The little flame you see in your gas fireplace after you have turned it off is called a pilot light. A Standing Pilot Light runs constantly, whether your fireplace is on or off. When you turn your fireplace on, a spark ignites a temporary pilot flame, which in turn lights up your fire.
Can you adjust the pilot light on a furnace?
about 1/2 inch
Why is my pilot light flame too high?
If the flame appears to be too small or sputters on and off, then the simple solution would be to adjust the size of the flame using a screw that you will see on the pilot light.
Where is the pilot light adjustment screw?
So, if your pilot light flame also tends to be too high, ensure that your fireplace doesn’t have a button to bring the flame up or downward. If there’s no such button, adjust a screw on the fireplace. Turning it clockwise will reduce the fire whilst moving the opposite direction will raise it.
What color should your pilot light be?
blue
What should fireplace pilot light look like?
A healthy pilot flame will be much like a blue blow torch flame. It will shoot sideways and be directly on your thermocouple and thermopile sensors. An unhealthy yellow pilot flame is more like a candle. It will shoot straight up in the air and will not engulf your sensors.
Should a pilot light be orange?
The flames from traditional pilot lights should burn a bright blue color. If your pilot light’s flame is orange or yellow, it is burning inefficiently due to a lack of oxygen. The thermocouple should sense when this happens because the heat from the flame will not be as hot as it should be.